Electronic,spectra, and spin orbit interaction for FrAr van der Waals system

The potential energy curves and spectroscopic constants of the ground and many excited states of the FrAr van der Waals system have been determined using a one‐electron pseudopotential approach. The Fr⁺ core and the electron–Ar interactions are replaced by effective potentials. The Fr⁺Ar core–core interaction is incorporated using the accurate CCSD(T) potential of Hickling et al. (Phys. Chem. Chem. Phys. 2004, 6, 4233). This approach reduces the number of active electrons of the FrAr van der Waals system to only one valence electron, which permits the use of very large basis sets for the Fr and Ar atoms. Using this technique, the potential energy curves of the ground and many excited states are calculated at the self consistent field (SCF) level. In addition, the spin–orbit interaction is also considered using the semiempirical scheme for the states dissociating into Fr (7p) and Fr (8p). The FrAr system is not studied previously and its potential interactions, spectroscopic constants and dipole functions are presented here for the first time. Furthermore, we have predicted the X²Σ⁺–A²Π_1/2, X²Σ⁺–AΠ_3/2, X²Σ⁺–B²Σ_1/2⁺, X²Σ⁺–3²Π_1/2, X²Σ⁺–3²Π_3/2, and X²Σ⁺–5²Σ_1/2⁺ absorption spectra. © 2012 Wiley Periodicals, Inc.     

Bulk polymer nanoparticles containing a tetrakis(3-hydroxyphenyl)porphyrin for fast and highly selective separation of mercury ions

We report on the synthesis of polymeric nanoparticles (PNPs) containing a tetrakis(3-hydroxyphenyl)porphyrin, and their use for the separation of mercury(II) ion. The PNPs were prepared by bulk polymerization from methacrylic acid (the monomer), ethyleneglycol dimethacrylate (the cross-linker), 2,2′-azobisisobutyronitrile (the radical initiator) and the mercury(II) complex of 5,10,15,20-tetrakis(3-hydroxyphenyl)-porphyrin. The Hg(II) ion was then removed by treatment with dilute hydrochloric acid. The PNPs were characterized by colorimetry, FT-IR spectroscopy, and scanning electron microscopy. The material is capable of binding Hg(II) from analyte samples. Bound Hg(II) ions can be eluted with dilute nitric acid and then quantified by cold vapor AAS. The extraction efficiency, the effects of pH, preconcentration and leaching times, sample volume, and of the nature, concentration and volume of eluent were investigated. The maximum adsorption capacity of the PNPs is 249 mg g^?1, the relative standard deviation of the AAS assay is 2.2 %, and the limit of detection (3σ) is 8 ng.L^?1. The nanoparticles exhibit excellent selectivity for Hg(II) ion over other metal ions and were successfully applied to the selective extraction and determination of Hg(II) ion in spiked water samples.

Anodic stripping voltammetry of silver(I) using a carbon paste electrode modified with multi-walled carbon nanotubes

We describe a silver(I)-selective carbon paste electrode modified with multi-walled carbon nanotubes and a silver-chelating Schiff base, and its electrochemical response to Ag(I). Effects of reduction potential and time, accumulation time, pH of the solution and the stripping medium were studied by differential pulse anodic stripping voltammetry and optimized. The findings resulted in a method for the determination of silver over a linear response range (from 0.5 to 235 ng?mL^?1) and with a detection limit as low as 0.08 ng?mL^?1. The sensor displays good repeatability (with the RSD of ±?2.75 % for 7 replicates) and was applied to the determination of Ag(I) in water samples and X-ray photographic films.

One-Pot Synthesis of 3,5-Disubstituted 1,2,4-Oxadiazoles Directly from Nitrile and Hydroxylamine Hydrochloride Under Solvent-Free Conditions Using Potassium Fluoride as Catalyst and Solid Support

A one-pot synthesis of 3,5-disubstituted 1,2,4-oxadiazoles with two identical substituents directly from the reaction of nitriles and hydroxylamine hydrochloride in the presence of potassium fluoride as catalyst and solid support under solvent-free condition is described. Moreover, the formation of products has been discussed, and a plausible mechanism has been presented. Simplicity of the process, workup in aqueous media, and excellent yields are some advantages of this method.     

Facile Synthesis of Benzotriazole Derivatives Using Nanoparticles of Organosilane-Based Nitrite Ionic Liquid Immobilized on Silica and Two Room-Temperature Nitrite Ionic Liquids

Nanoparticles of organosilane-based nitrite ionic liquid immobilized on silica, 1-butyl-3-methylimidazolium nitrite, and 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite were used as effective reagents for the preparation of benzotriazole derivatives from 1,2-diaminobenzenes at room temperature under mild solvent-free conditions. These ionic liquids play as nitrosonium sources in this procedure.1,2-Diaminobenzene derivatives have been treated with ionic liquids to give the related diaminobenzenes in very good to excellent yields in short reaction times.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the full experimental and spectral details.     

Ionic Liquid Iodinating Reagent for Mild and Efficient Iodination of Aromatic and Heteroaromatic Amines and Terminal Alkynes

Hexamethylene bis(N-methylimidazolium) bis(dichloroiodate) (HMBMIBDCI), an ionic liquid iodinating reagent, have been prepared and characterized. Its ability to perform iodination reactions with a variety of substrates has been explored. In general, iodination reactions of aromatic and heteroaromatic amines proceed with good yields in the absence of solvent. Reactions of terminal alkynes in the presence of 1,8-diazabicyclo [5.4.O] undec-7-ene and tetrahydrofuran have been investigated as well.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource: Full experimental and spectral details.]     

Isolation and biological evaluation of chromone alkaloid dysoline,a new regioisomer of rohitukine from Dysoxylum binectariferum

The chromone alkaloid dysoline (1), a new regioisomer of rohitukine (2) along with rohitukine and rohitukine-N-oxide (3) were isolated from the stem barks of Dysoxylum binectariferum. The structure of dysoline (1) was determined by extensive 2D-NMR studies and the absolute configuration was established by NOESY and CD spectra. Dysoline (1) consisted of a 5,7-dihydroxy-2-methylchromone nucleus substituted with a 2′-hydroxylated N-Me piperidine ring at the C-6 position. Dysoline differs from rohitukine by the position of the piperidine ring on the chromone nucleus. Dysoline displayed promising cytotoxicity in HT1080 fibrosarcoma cells with an IC₅₀ of 0.21 μM, and also displayed significant inhibition of proinflammatory cytokines TNF-α and IL-6.     

Modification of the Scaled Particle Theory for Solubility of Non-Polar Gases in Water

In this work based on the modified scaled particle theory (SPT), the solubility of non-polar gases (He, Ar, N₂, H₂, O₂, CO₂ and CH₄) in water has been studied over a wide range of temperatures. Calculations of Henry’s law constant by the SPT are related to the inherent physical properties and parameters of solvent and solute, all of which are considered temperature dependent. The temperature dependence of molar volume and hard sphere diameter of solvent and polarizability of solute have the most significant effects on the solubilities of gases in water. The average relative deviation is less than 3 %. Also, the effect of different mixing rules in the application of SPT to prediction of gas solubility has been studied.     

The electrocatalytic behavior of electrodeposited Ni–Mo–P alloy films towards ethanol electrooxidation

Ternary Ni–Mo–P thin films have been electrodeposited from citrate‐based electrolyte onto graphite substrates for application as anode catalysts for ethanol electrooxidation. The operating deposition parameters were optimized to produce Ni–Mo–P alloy films of outstanding catalytic activity. The phase structure of the deposits was evaluated employing X‐ray diffraction technique. Morphology and chemical composition of the deposited alloy films were studied using scanning electron microscopy and energy‐dispersive X‐ray analysis, respectively. The results demonstrated that the rate of Ni–Mo–P deposition increases with increasing the ammonium molybdate concentration in the plating electrolyte up to 10 g l^?1. Also, the amount of Mo in the deposits increases with increasing the ammonium molybdate concentration up to 7.5 g l^?1, and the maximum Mo content in the film was 9.1 at.%. The catalytic activity of Ni–Mo–P/C alloy films has been evaluated towards electrooxidation of ethanol in 1.0 M NaOH solution by using cyclic voltammetry and chronoamperometry. The catalytic performance of the prepared anodes as a function of the amount of Mo was studied. The results showed an increase in the oxidation peak current density of ethanol with increasing the Mo at.% in the deposited alloy films. Additionally, Ni–Mo–P/C electrodes displayed significantly improved catalytic activity and stability towards electrooxidation of ethanol compared with that of Ni–P/C electrode. Copyright © 2013 John Wiley & Sons, Ltd.     

Magnetic solid-phase extraction using Schiff base ligand supported on magnetic nanoparticles as sorbent combined with dispersive liquid-liquid microextraction for the extraction of phenols from water samples

ABSTRACT

In this work, the magnetic sorbent was developed by covalent binding of a Schiff base ligand, N,N’-bis(3-salicyliden aminopropyl)amine (salpr), on the surface of silica coated magnetic nanoparticles (Salpr@SCMNPs). The core-shell nanoparticle was applied for the magnetic solid-phase extraction (MSPE) combined with dispersive liquid-liquid microextraction (DLLME) of phenolic compounds from water samples prior to gas chromatography-flame ionisation detector (GC?FID). Characterisation of the Salpr@SCMNPs was performed with different physicochemical methods such as Fourier transform infrared (FT-IR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). Variables affecting the performance of both extraction steps such as pH of the water sample, the sorbent amount, the desorption conditions, the extraction time; and extraction solvent were studied. Under the optimised conditions, the analytical performances were determined with a linear range of 0.01–100 ng mL^?1 and a limit of detection at 0.003–0.02 ng mL^?1 for all of the analytes studied. The intra-day (n = 5) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 6.9–8.9% and 7.3–10.1%, respectively. The proposed method was executed for the analysis of real water samples, whereby recoveries in the range of 92.9–99.0% and RSD% lower than 6.1% were attained.